The dimensions and the weight of the PSS Series are: (width x height x depth) 23.5x45x28 cm and the active models weigh 9.7 kg including battery pack.

Active loudspeakers have at least one amplifier. Passive loudspeakers do not have an amplifier, but are connected to an active loudspeaker in order to obtain increased audio pressure or reach.

The loudspeakers are mounted on stands in order to achieve better sound quality. An ideal position is: loudspeaker height = listeners’ ear level.

It is technically impossible to use two microphones simultaneously with one receiver. Active Sound is therefore one of only a few companies in the world which can supply active loudspeakers with two built-in receivers. Two wireless microphones can be used simultaneously with these models.

The extra loudspeaker is controlled by the active loudspeaker. It is used to achieve increased audio pressure or better reach. Active Sound is one of the few companies which offer this possibility. It is also possible to use two or more active loudspeakers so that cables are no longer necessary.

The battery is a 9 volt block battery and its capacity heavily depends on the type of battery used. Capacity normally ranges between 8 and 20 hours.

Yes. There is no reason why these cannot be used. If two rechargeable batteries are used, one can be charged at any time.

LEDs on the back should indicate the charging status of the battery pack: red = battery pack being charged and green = battery pack fully charged. After charging the battery packs can be used for eight hours (depending on volume level and whether music or speech is being transmitted).

No. Due to its intelligent configuration the battery pack cannot be overcharged. The power cable should, however, be removed once the battery pack has been charged.

To answer this question properly you need to know whether the equipment is being used indoors or outdoors and whether the audience is “quiet”. The desired results should be able to be achieved with two active and two passive loudspeakers on stands positioned at different places in the room.

Yes, if the waterproof carrying case is used. These cases can be opened partially in specific places.

Our microphone transmitters have a guaranteed reach of 30 meters.

Yes. The wireless microphones can also transmit through walls. The signal can, however, be weaker.

The PSS 300 would be a good solution for you. Besides a battery pack and a receiver, this loudspeaker also has a built-in CD player. Your equipment would be complete with a wireless headset microphone and a stand.

This happens to every microphone – regardless of who it is made by or whether it is wireless or not. The sound of the loudspeaker is picked up directly by the microphone, sent to the loudspeaker and is amplified over and over again. This is called feedback or whistling. To solve the problem, simply move away from the loudspeaker.

With this CE logo the manufacturer guarantees that its product complies with EU Directives for safety, health, environment and consumer protection.

No problem. There are two connections for this. You can also connect the microphones.

Yes. In this case our SAS Systems are ideal because they are light and easily transportable since the amplifier and the two satellite speakers are built-in.

Connect the output of your mixer with an input of the active loudspeaker.

Connect the output of your iPod for the headphones with an input of the active loudspeaker.

No, this is no longer necessary. The frequencies we use are free.

The guarantee on all our products is one year.